How Do You Remove A No Visible Toilet Seat Bolt

A small screwdriver will fail to grab the bolt groove and will strip the bolt. Sometimes its little flaps that will lift with a flat head screwdriver gently slid under the small lip of the cap.

How To Remove Replace Toilet Seat With Hidden Fixings 7 Easy Steps

To remove the toilet seat start by locating where the seat is joined with the toilet.

How do you remove a no visible toilet seat bolt. Remove each nut by spinning it counterclockwise then pull the bolts out and discard them. Most of the time the bolts are just hidden from plain sight. There should be a way that the seat was installed on the toilet.

Same thing as before try gently sliding a. When it comes to removing toilet seats the big gun is a drill with a 14-inch drill bit. Do one at a time.

Step 3 Spray penetrating lubricant in the threads of the plastic bolt If the nut does not unthread easily. You should see the ends of a screw or a mounting nut. Then insert the bit into the bottom of a stuck metal nut that you cant turn at the point at which it meets the bolt.

So recheck your toilet seat for any joint bolts or screws and the hinges as well. Plastic bolts wont turn. Thanks View attachment 38231.

Cant remove toilet seat. If the bolts or nuts are plastic they cant corrode and will come off easily. Report this comment Thanks for reporting.

Now that you found the bolts you should tighten it slightly if this is the problem with the toilet seat. I have the job of trying to remove the fittings for an existing soft-close top-fix toilet seat. Sometimes its a long flat covering.

If you need to replace hinges as well as the bolts its best to buy a toilet seat replacement. Most of the time the bolts are found hidden from plain surfaces. Read on for more.

If its a bottom-fixing unit youll see the hinges at the back of the toilet seat. To find them keep running your hands to and fro. The foyer has a blue water marks in the ceiling.

This vid shows how to remove a stripped expansion bolt with rubber gasket from the base of a Toto toilet. As a rule the hole is where you lock the toilet in the seat with screws and bolts. The problem is that I cannot get the 2 existing bungs and one stubborn machine screw out.

Unscrew the bolt with a pliers or a screwdriver while you hold the nut underneath with the pliers. Thank you for reporting. You most likely have either a bottom-fixing toilet or a top-fixing toilet.

So now you know this is not a simple room. Look carefully at the back of the toilet seat for any signs of bolts or screws. Use a wrench screwdriver or locking pliers to unscrew the seat off.

I suspect its the toilet. I cannot see a bolt or button to release them. Its a wall hung toilet.

This refers to where on the toilet your screws for the toilet seat are located. Want to put on a new toilet seat but cant get bolts to loosen 5 answers Edit Comment. Drill a hole straight up through the inside edge of the nut.

But the toilet has no floor mount nutsbolts. Let sit for a couple of hours. Use a stubby screwdriver clamped to a vise grip stubby pointed down vise grip at a right anglelike a letter Land heavy gloves so it wont hurt your hand if it slips.

Make sure you have a screwdriver that is large enough to fit into the bolt groove. This particular toilet is a Porcelanosa NK brand but is applicable to many similar toilets with hidden screws or bolts. But there are still other types of seats that use slightly different structural holes and ways of connecting seats but do not worry you can solve this dilemma yourself.

Hold the bolts in place with the screwdriver as you turn the plastic nuts on the underside of the back of the toilets bowl. My soft close lid and seat are loose and no longer soft close. Most models of toilet seats use simple holes as the lower access is connected to the toilet.

There is no hole for an Allen key or any kind of release mechanism. Checking the Toilet Seat. Put on goggles to protect your eyes.

Its always better to be safe and alert than be sorry. Underneath the seat there are no boltsscrews visible. If you cant spot any bolts or screws from on top of the seat check underneath.

SOAK the area with WD40 place pan under to catch drips. You have to lift up what ever is covering the bolts. Answer 2.

To remove a top-fixing toilet seat raise the seat 90 degrees and lift it off. To remove the seat hold the nut while unscrewing the bolt. Simply pry open the cover behind the seat to expose the bolts head.

SOAK again and let sit. First take a look at the bolts that secure the seat. In 2009-2010 she had the toilet paintedcolored white to match the Walk in Bathsauna tub she had installed.

Place the plastic nuts in a safe location and pull up on the back of the toilets seat.

How To Replace Toilet Seats With Hidden Bolts Saving Money Living Smart